Figure 9: Installing Wall Mount Plates
Once the wall mounting plates are secure on the device, you will need to attach the wall
screws (x6).
Locate the installation site and place the switch against the wall, making sure it is the final
6.
installation location.
Use the wall mount plates as a guide to mark the locations of the screw holes.
7.
Drill four holes over the four marked locations on the wall, keeping in mind that the holes
8.
must accommodate wall sinks in addition to the screws.
Insert the wall sinks into the walls.
9.
10. Insert the screws into the wall sinks. Leave a 2 mm gap between the wall and the screw
head to allow for wall mount plate insertion.
38
eWorx SE500 Series Switches
: