Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
IPv6 Address
Enter the IP address or host name of the station you want the switch to ping.
The initial value is blank. The IP Address or host name you enter is not retained
across a power cycle. Host names are composed of series of labels concatenated
with dots. Each label must be between 1 and 63 characters long, and the entire
hostname has a maximum of 64 characters.
Count
Enter the number of echo requests you want to send. The default value is 4. The
value ranges from 1 to 5. The count you enter is not retained across a power
cycle.
Interval (in sec)
Enter the interval between ping packets in seconds. The default value is 1. The
value ranges from 1 to 5. The interval you enter is not retained across a power
cycle.
Size (in bytes)
Enter the size of ping packet. The default value is 56. The value ranges from 8 to
5120. The size you enter is not retained across a power cycle.
Ping Results
Display the reply format of ping.
PING 2222::777 (2222::777): 56 data bytes
--- 2222::777 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Or
PING 2222::717 (2222::717): 56 data bytes
64 bytes from 2222::717: icmp6_seq=0 ttl=128 time=10.0 ms
64 bytes from 2222::717: icmp6_seq=1 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=2 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=3 ttl=128 time=0.0 ms
--- 2222::717 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.0/2.5/10.0 ms
Apply
Click Apply to display ping result for the IP address.
Table 120: Diagnostics > IPv6 Ping Test
195
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
