Declaration Of Conformity - Advantech eWorx SE500 User Manual

DECLARATION OF CONFORMITY

CE
This product has passed the CE test for environmental specifications when shielded cables are
used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for passing
included the equipment being operated within an industrial enclosure. In order to protect the
product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly
recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Safety Instructions
Read these safety instructions carefully.

Keep this user manual for later reference.

Disconnect this equipment from any AC outlet before cleaning. Use damp cloth. Do not use

liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.
Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall may

cause damage.
The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the equipment to

the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over the

power cord.
All cautions and warning on the equipment should be noted.

If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over voltage.
Never pour any liquid into an opening. This may cause fire or electrical shock.

Never open the equipment. For safety reasons, the equipment should be opened only by

qualified service personnel.
20
eWorx SE500 Series Switches
: