Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Port
Enter the port number to set the Egress Bandwidth Control.
State
Select Disabled or Enabled to set the Egress Bandwidth Control state.
Rate (Kbps)
Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth rate.
Apply
Click Apply to save the values and update the screen.
Table 91: QoS > Rate Limit > Egress Bandwidth Control
Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
Figure 105: QoS > Rate Limit > Egress Queue
157
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
