Table 100: Management > Snmp > Snmp User Settings - Advantech eWorx SE500 User Manual

The following table describes the items in the previous figure.
Item
User Name
Access Right
Encrypted
Auth-Protocol
Password
Priv-Protocol
Password
Add
Table 100: Management > SNMP > SNMP User Settings
SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the SNMP credentials
corresponding to the version that is included in the trap message.
To access this page, click Management > SNMP > SNMP Trap.
168
eWorx SE500 Series Switches
Description
Enter a user name (up to 32 characters) to create an SNMP profile.
Click read-only or read-write to define the access right for the profile.
Click the option to set the encrypted option for the user setting.
Click the drop-down menu to select the authentication level: MD5 or SHA. The
field requires a user password.
MD5: specify HMAC-MD5-96 authentication level
SHA: specify HMAC-SHA authentication protocol
Enter the characters to define the password associated with the authentication
protocol.
Click the drop-down menu to select an authorization protocol: none or DES.The
field requires a user password.
None: no authorization protocol in use
DES: specify 56-bit encryption in use
Enter the characters to define the password associated with the authorization
protocol.
Click Add to save the values and update the screen.
: