Tcp Modbus - Advantech EKI-7428G Series User Manual

PoE Port Status
To access this page, click Management > Power Over Ethernet > PoE Port Status.
The ensuing table for PoE Port Status settings are informational only: Port, Current (mA),
Voltage (V), Power (W) and Temp. (°C).

4.9.4 TCP Modbus

The TCP Modbus function allows for client-server communication between a switch module
(server) and a device in the networking running MODBUS client software (client).
TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click Management > TCP Modbus > TCP Modbus Settings.
Figure 4-91. Management > TCP Modbus > TCP Modbus Settings
The following table describes the items in the previous figure.
Table 4-89. Management > TCP Modbus > TCP Modbus Settings
Item
State
Time out
Apply
The ensuing table for TCP Modbus Status settings are informational only: TCP Modbus
status and TCP Modbus time out.
Click Disabled or Enabled to set the TCP Modbus state.
Enter the value (1 to 86400) to define the timeout period between transport
time.
Click Apply to save the values and update the screen.
Description
M S
ANAGING WITCH
118