The switch is now ready for installation on its final location.
2.3 INSTALLING THE SWITCH
2.3.1 DIN RAIL MOUNTING
The DIN rail mount option is the quickest installation option. Additionally, it optimizes the use
of rail space.
The metal DIN rail kit is secured to the rear of the switch. The device can be mounted onto a
standard 35mm (1.37") x 75 mm (3") height DIN rail. The devices can be mounted vertically or
horizontally. Refer to the following guidelines for further information.
A corrosion-free mounting rail is advisable.
When installing, make sure to allow for enough space to properly install the cabling.
Installing the DIN-Rail Mounting Kit
Insert the top back of the mounting bracket over the DIN rail.
1.
Push the bottom of the switch towards the DIN rail until it snaps into place.
2.
Figure 7: Installing the DIN-Rail Mounting Kit
36
eWorx SE500 Series Switches
: