Table of Contents
Advertisement
4.2.1 CHANGING DEFAULT PASSWORD
In keeping with good management and security practices, it is recommended that you change
the default password as soon as the device is functioning and setup correctly. The following
details the necessary steps to change the default password.
To change the password:
Navigate to Tools > User Account.
1.
From the User drop-down menu, select the Admin (default) account.
2.
In the User Name field, enter admin for this account. It is not necessary to change the user
3.
name, however, a change in the default settings increases the security settings.
In the Password field, type in the new password. Re-type the same password in the Retype
4.
Password field.
Click Apply to change the current account settings.
5.
Figure 31: Changing a Default Password
After saving all the desired settings, perform a system save (Tools > Save Configuration).
The changes are saved.
59
eWorx SE500 Series Switches
:
Advertisement
Table of Contents
