Electrical Fuses; Auxiliary Consumers - Mercedes-Benz Unimog Operating Instructions Manual

Electrical fuses

Auxiliary consumers

Retrofitting of additional consumers or elec-
trical devices requires special skills.
Fuses
Important safety notes
Blown fuses must be replaced by fuses of the
same type, identifiable by the colour and
amperage, with the amperages specified in
the fuse allocation chart. Further information
can be obtained from a Mercedes-Benz Ser-
vice Centre.
G
WARNING
If you manipulate, bridge or replace a faulty
fuse with a fuse of a higher amperage, the
electric cables could be overloaded. This may
result in a fire. There is a risk of an accident
and injury.
Always replace faulty fuses with specified new
fuses of the correct amperage.
Before replacing a fuse
X
Turn the key to position 0 in the ignition
lock.
X
Switch off all electrical consumers.
Opening/closing the fuse box
The fuse box is behind the right-hand seat.
X
To open: slide the right-hand seat forward.
X
Open quick-release fasteners =.
X
Remove fuse box lid :.
X
Pull fuse box panel ; upwards and out.
X
To close: insert fuse box panel ;.
X
Attach fuse box lid :.
X
Close quick-release fasteners =.
X
Slide the seat back to the desired position.
Electrical fuses
Z
327