Rotating Beacon - Mercedes-Benz Unimog Operating Instructions Manual

Lighting system
86
X
Position housing : at the bottom using the
lug and swing it upwards.
X
Tighten screws ;.
Exit lamp
X
Open the door.
X
Press out lens ; from recess (arrow :)
with a suitable screwdriver.
X
Press spring = on the cable connector
downwards and remove the cable connec-
tor.
X
Turn socket ? in the direction of arrow A
as far as it will go and remove it.
X
Pull out the bulb from socket ?.
X
Press a new bulb into socket ?.
X
Insert socket ?.
X
Insert socket ? into the housing and turn
it clockwise, in the opposite direction to
that indicated by arrow A, as far as it will
go.
X
Press spring = on the cable connector
downwards and attach the cable connec-
tor.
X
Align the bottom of lens ; and press
inwards until it engages.
Working-area lamps
X
Remove screws :.
X
Remove headlamp unit ; of the working-
area lamp.
X
Remove cable connectors = and ?.
X
To release locking spring A, push it to the
left and swing it upwards.
X
Remove bulb B.
X
Insert new bulb B in such a way that the
recesses on the base fit into the socket.
X
Fold locking spring A downwards and
engage it.
X
Attach both cable connectors = and ?.
X
Insert headlamp unit ;.
X
Tighten bolts :.

Rotating beacon