Perimeter Lamp - Mercedes-Benz Unimog Operating Instructions Manual

Tail lamp
Tail lamp, right
Tail lamp, left
Screws
:
Perimeter/side marker lamps
;
Turn signal lamps
=
Brake lamp
?
Reversing lamp
A
Rear lamps
B
Rear foglamp
C
You cannot change bulbs for turn signal
lamps, tail lights, brake lights or perimeter
lamps in vehicles with LED modules. If nec-
essary, have these bulbs replaced at a quali-
fied specialist workshop.
X
Remove screws :.
X
Remove the lamp lens.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
X
Attach the lamp lens.
X
Tighten screws :.
Licence plate lamp
The licence plate lamp is behind the reflector
unit.
X
Remove screws :.
X
Remove the lamp lens.
X
Remove reflector units ; and ?.
X
Applying light pressure, turn bulb = anti-
clockwise and remove it.
X
Insert new bulb = and turn clockwise,
applying light pressure.
X
Insert reflector units ; and ?.
X
Attach the lamp lens.
X
Tighten screws :.

Perimeter lamp

X
Remove screw ;.
X
Swing housing : of the perimeter lamp
outwards slightly and remove it.
X
Applying light pressure, turn bulb = anti-
clockwise and remove it.
X
Insert new bulb = and turn clockwise,
applying light pressure.
Lighting system
Z
85