Connecting Attached Equipment With Load Sensing Connections - Mercedes-Benz Unimog Operating Instructions Manual

Hydraulic connections
232
Chassis, right
Load-sensing connection
:
Connecting attached equipment with
load-sensing connection
If you connect attached equipment to the
load-sensing connection, the required flow
rate for this equipment is controlled automat-
ically by the device. The attached equipment
is then directly connected to the positioning
pump, as soon as you have selected
"Hydraulics" input window (
X
Make sure that the engine is switched off.
X
Connect attached equipment that has a
load-sensing connection with individual
pressure compensation (see the manufac-
turer's operating instructions).
X
Perform a safety and function check on the
attached equipment (see the manufactur-
er's operating instructions).
LS
in the
Y page 237).