Pairing A Mobile Phone - Mercedes-Benz Unimog Operating Instructions Manual

Bluetooth
154
Requirements for a Bluetooth
tion
The following requirements must be met for
the CD radio to detect the mobile phone:
the mobile phone is located inside the vehi-
R
cle in the vicinity of the CD radio
the Bluetooth
R
Y
activated (
the mobile phone is prepared for pairing
R
Switching the Bluetooth
or off
Activating the Bluetooth
X
Press and hold the ; button.
The display briefly shows
®
Bluetooth symbol flashes in the display,
and the CD radio automatically searches
for mobile phones that have already been
paired with the CD radio.
The Bluetooth
i
vated until you deactivate it again. If you
switch off the CD radio, the Bluetooth
connection will be ended. If you switch it
on, the CD radio re-establishes the con-
nection.
Deactivating the Bluetooth
X
Press and hold the = button.
The display briefly shows
nection to the mobile phone is ended.
®
settings
®
®
function of the CD radio is
page 154)
®
function on
®
function
BT ON. The ª
®
function will remain acti-
®
function
BT OFF. The con-
connec-

Pairing a mobile phone

Pairing the mobile phone via Bluetooth
pairing
X
Press the t button repeatedly until the
display shows
X
Turn the control knob anti-clockwise.
The display shows
X
To exit the menu: press the SRC button or
wait 10 seconds.
X To start a search for mobile phones:
Press and hold the ; button.
The ª Bluetooth
display. The CD radio searches for mobile
phones within range for a certain period of
time. At the end of the search, a tone
sounds.
If at least one mobile phone is found, the
display briefly shows
device name(s) of the mobile phone(s).
®
If the CD radio does not find a mobile
i
phone, the display briefly shows
EMPTY.
X
Select the desired mobile phone using the
E or F button.
X
Press and hold the ; button.
BT PAIR BT EXT.
or
BT PAIR.
®
symbol flashes in the
BT LIST
and then the
BT LIST
®