Swivel Seat - Mercedes-Benz Unimog Operating Instructions Manual

Seat angle
X
Pull lever ; up and hold it.
X
Apply pressure to or relieve pressure from
the seat cushion or backrest in order to
move it to the desired position.
X
Release lever ;.
Seat height
X
Pull lever = up or push it down to the
desired level.
The seat rises or lowers.
EASY-ENTRY/EXIT feature
Always use the EASY-ENTRY/EXIT feature
when getting out of the vehicle.
X
Push lever ? downwards.
The seat is lowered completely.
X
Pull lever ? upwards.
The seat returns to the previously set
height.
Lumbar support
X
Lower lumbar support: press the upper or
lower section of switch A.
The lower lumbar support is increased or
decreased.
X
Upper lumbar support: press the upper or
lower section of switch B.
The upper lumbar support is increased or
decreased.

Swivel seat

Overview
X
Make sure that the key is in position 2 in the
ignition lock.
It is possible to carry out all possible seat
adjustments.
X
Make sure that the vehicle is at a complete
standstill and cannot roll away.
Adjusting the head restraints
X
Pull head restraint A up or push it down to
the desired height.
X
Push head restraint A back or pull it for-
wards to the desired angle.
Seat armrests
X
If necessary, fold up seat armrests B.
X
Use the handwheel on the underside to set
the angle of seat armrests B.
Seat angle
X
Pull lever C up and hold it.
X
Apply pressure to or relieve pressure from
the seat cushion in order to move it to the
desired position.
X
Release lever C.
Seats
67
Z