Mercedes-Benz Unimog Operating Instructions Manual page 118

On-board computer
116
time the display also shows the date and
time.
X
Turn the key to position 2 in the ignition
lock.
The on-board computer shows the last
active menu window, e.g. the
menu window in the ß trip data menu.
If a malfunction is detected, the on-board
computer will display the events in an event
window first. In addition to the event win-
dow, an indicator lamp may light up in the
instrument cluster or in the status area of
the on-board computer. If there are several
messages, the on-board computer shows
them one by one according to priority level.
If further information on the malfunction is
available in the event window, the event
window shows the Û symbol. You can
display the information using the u but-
ton.
X
Clear the event window by pressing the 9
button.
X
To scroll through the main menus: press
u or t.
X To display further menu windows in the
main menu: press r or s.
X To open and close the input window:
when a menu window displays the 9 sym-
bol, press 9.
X To select menu bars in the input win-
dow: press r or s.
X To change the value or select an entry
in the input window: press u or t.
If you call up a particular menu window
i
regularly, e.g. the engine oil level check,
save it on the Ú button.
X
To save a favourite menu window: call
up the desired menu window and press the
Ú button for approximately two seconds
until a tone sounds.
X To display the favourite menu window:
briefly press the Ú button.
Areas in the on-board computer dis-
play
Truck info
Example: menu window, Truck info
Register and title bar: register : shows the
main menu. The active main menu is repre-
sented in white. Register ? shows you the
number of menu windows (submenus) and
which window is currently selected. Title bar
A shows the name of the active menu win-
dow.
Display area: the on-board computer dis-
plays the menu window or event window in
display area ;. An event window is displayed
automatically and contains a message, e.g.
Reset trip
malfunctions, e.g.
ter full. In addition to the event window, an
indicator lamp may light up in status area =
of the on-board computer or in the instrument
cluster. If you can confirm the event window
using the 9 button, the event window is hid-
den. An indicator lamp that lights up in status
area = of the on-board computer or in the
instrument cluster does not go out after the
event window is confirmed.
meter?, or information about
Diesel particle fil‐