Electrical Fuses - Mercedes-Benz GLE 2022 Operator's Manual

652 Breakdown assistance
Towing eye 1 is located under the load compart-
ment floor.
Fitting and removing the towing eye
Press the mark on cover 1
#
remove.
Screw in the towing eye at least 7 turns to the
#
right as far as it will go, then tighten it. The
thread may be dirty or similar if the towing eye
cannot be screwed in as described. Towing
cannot be performed.
Vehicles with a trailer hitch: vehicles with a trailer
hitch do not have a rear bracket for the towing
eye. Fasten the tow bar to the trailer hitch.
After removing the towing eye, engage the
#
cover 1
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
inwards and
in the bumper.
F167 0009 02
Tow-starting the vehicle
Vehicles with automatic transmission
* NOTE Damage to the automatic transmis-
sion due to tow-starting
The automatic transmission may be damaged
in the process of tow-starting vehicles with
automatic transmission.
Vehicles with automatic transmission
#
must not be tow-started.
Vehicles with an automatic transmission must
#
not be tow-started.

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.