Headlamp Flasher - Mercedes-Benz Unimog Operating Instructions Manual

indicator lamps next to the light switch light
up.
If the vehicle only has a rear foglamp, turn
i
the light switch to the L position and
pull the light switch out one level.
Headlamp range control
The headlamp range control is used to adapt
the downward angle of the headlamp beams
in accordance with the load on your vehicle.
The angle of the headlamp beams changes if
the seats are occupied or if the vehicle is loa-
ded or unloaded. This can impair visibility and
dazzle oncoming traffic.
X
Switch on the dipped-beam headlamps
( Y page 74).
X
Turn headlamp range control : to the
desired position. The road should be illumi-
nated from 40 m to 100 m and the dipped-
beam headlamps must not dazzle oncom-
ing vehicles.
For an unladen vehicle, use position 0 or 1
depending on the vehicle body.
Combination switch
Main-beam headlamps/headlamp
flasher
X
Ensure that the key is in position 2 in the
ignition lock.
X To switch on the main-beam head-
lamps: switch on the L dipped-beam
headlamps ( Y page 74).
X
Push the combination switch in the direc-
tion of arrow ; and engage.
The K indicator lamp in the instrument
cluster lights up.
X
To use the headlamp flasher: briefly pull
the combination switch in the direction of
arrow :.
The K indicator lamp in the instrument
cluster and the main-beam headlamps light
up briefly.
Turn signals
Lighting system
Z
75