Table of Contents
Advertisement
Installing and removing the towing eye
Press cover
1
at top
2
inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
After removing the towing eye, engage cover
#
1
in the bumper.
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Breakdown assistance 407
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
Tow-starting the vehicle
If the drive system does not start, have the
#
vehicle transported to a qualified specialist
workshop, e.g. an authorized Mercedes-Benz
Center.
You cannot start the drive system by tow-
#
starting the vehicle. Do not make any
attempts to tow-start the vehicle.
Electrical fuses
Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
Advertisement
Table of Contents
