Cable Ducts - Mercedes-Benz Unimog Operating Instructions Manual

Changes the installation position of
the control lever and hydraulic sys-
tem controls
X
Press release catch ; firmly and pull con-
trol lever ? up and out in the direction of
the arrow.
X
Press release catch : firmly and pull
hydraulic system controls = up and out in
the direction of the arrow.
X
Unscrew electrical plug-type coupling D of
control lever ? and separate.
X
Mark cable connector A at the corre-
sponding sockets of hydraulic system con-
trols = and remove.
X
Place control lever ? and hydraulic system
controls = in front of the alternative open-
ing.
X
Connect plug-type coupling D of control
lever ? and tighten.
X
Attach cable connector A to the marked
sockets of hydraulic system controls =.
X
Position lugs B to the rear and press
hydraulic system controls = forwards and
downwards until it engages.
X
Position lugs C to the rear and press con-
trol lever ? forwards and downwards until
it engages.
Cable guides
Cable ducts on the cab rear wall
Cable guide in the engine compartment
Features
95
Z