Centre Console - Mercedes-Benz Unimog Operating Instructions Manual

Power supply
92
24 V socket in the centre console
24 V socket : can be used for accessories,
e.g. torches or cigarette lighters. The 24 V
socket can carry a maximum load of 360 W.
X
Make sure that the key in the ignition lock is
in position 1.
Sockets on the cab rear wall
Diagnostics connection
:
12 V, 15 A, 3-pin socket with speed signal
;
24 V, 25 A, 3-pin socket with speed signal
=
The 3-pin sockets on the cab rear wall comply
with DIN EN 15431.
Service personnel can connect the corre-
sponding diagnostic testers to diagnostics
connection : (
X
Switch the 12 V socket on/off (
Y
page 29).
Y page 91).
Socket on the vehicle exterior
24 V, 7-pin power socket for equipment
:
The equipment socket complies with
DIN EN 15431.
PIN Function
1 Earth connection
2 Tail lamp, left
3 Turn signal, left
4 Unassigned
5 Turn signal, right
6 Tail lamp, right
7 Unassigned
Equipment socket, 32-pin
X
Fold swivel bar ; to the left.
X
Fold socket cap : of the 32-pin equipment
socket to the right.
Information on pin assignment and changing
a fuse can be found in the body/equipment