Hydraulics Menu Window - Mercedes-Benz Unimog Operating Instructions Manual

Menus and input windows in the on-board computer
Brief instructions for operation using
the control lever
u button, to change direction
:
F button, to set engine speed
;
Yellow button, to adjust settings
=
Black button, to call up menus
?
Blue button, can be assigned specific
F
functions ( Y page 241)
X
To select an entry: press and hold yellow
button = and press the u button :
upwards or downwards until the desired
entry has been selected
X
To change the value: press and hold yel-
low button = and press the F but-
ton ; upwards or downwards until the
desired value is shown.
X To call up a menu or function, to end
entry: press black button ?.
"Hydraulics" menu window
Below, the menus, submenus and input win-
dows of the hydraulics are described.
Structural
sequence in the
on-board com-
puter
Operation and main-
tenance â
Hydraulics menu windows, vehicles with gear
pump (example)
Symbols for the working hydraulics circuit
:
and power hydraulics circuit
Flow rates
;
Hydraulic connections
=
Symbols for operating mode display: con-
?
tinuous consumers, proportional control
or snow plough load relief
Hydraulic connections
A
Power hydraulics circuit IV deactivated
B
Power hydraulics circuit III activated
C
Working hydraulics circuit II in standby
D
mode
Working hydraulics circuit I activated
E
Selection
Axles
Tyres
Hydraulics
Trailer
Maintenance
Z
235