Deactivating - Mercedes-Benz Unimog Operating Instructions Manual

Hydrostatic drive system
200
Hydrostatic drive system status indicator
Working mode cruise control display
=
Drive condition display
?
Work mode display
A
mode display
X
Ensure that:
the engine is running
R
the constant working speed mode is
R
deactivated (
the vehicle is stationary
R
X
Press button :.
Indicator lamp ; in the button flashes.
Vehicles with Telligent automatic gear-
shift: in the status area of the on-board
computer, after a brief period, the drive
condition display lights up green and indi-
cator lamp ; in the button lights up and
stays lit. The hydrostatic drive system is
activated.
The previously selected work mode
A or driving mode
appears in the status area of the on-board
computer.
X
Vehicles with Telligent
depress the clutch pedal.
In the status area of the on-board com-
puter, after a brief period, the drive condi-
tion display lights up green and indicator
lamp ; in the button lights up and stays lit.
The hydrostatic drive system is activated.
The previously selected work mode
A or driving mode
appears in the status area of the on-board
computer.
M work
or driving
A drive
Y page 263)
M work
A drive
A also
®
gearshift:
M work
A drive
A also
X
Release the clutch pedal.
X
All vehicles: if necessary, select the alter-
nate mode; work mode
A drive
ing mode
X
If necessary, turn the direction switch to
the h (drive/driving forwards) or k
(reversing) position.
The last gear used in the hydrostatic drive
system is selected.
X
If the parking brake has been applied,
release the parking brake.
X
Control the vehicle speed using the accel-
erator pedal.
or
X
Activate working mode cruise control
( Y page 203).
X
Shift gear; see "Driving with the hydrostatic
Y
drive system" ( page 201) and "Driving
with the cruise control lever" (

Deactivating

You can disengage the hydrostatic drive sys-
tem at any time.
X Vehicles with Telligent automatic gear-
shift: press button :.
Indicator lamp ; in the button goes out.
The hydrostatic drive system status indica-
tor in the on-board computer goes out. The
hydrostatic drive system is deactivated.
X
Vehicles with Telligent gearshift: press
button :.
The indicator lamp in button ; flashes.
X
Completely depress the clutch pedal until a
clacking noise sounds in the instrument
cluster. If indicator lamp ; in the button is
off, the hydrostatic drive is disengaged.
The hydrostatic drive system status indica-
tor in the on-board computer goes out.
If the hydrostatic drive system is disengaged
while driving, a driving gear is automatically
selected again if the clutch is open. If you
want to engage the hydrostatic drive system
again, the vehicle must be stationary.
M work
A or driv-
Y
A ( page 201).
Y page 205).