Turn Signal Lamp - Mercedes-Benz Unimog Operating Instructions Manual

X
Turn socket : anti-clockwise in the direc-
tion of the arrow as far as it will go.
X
Pull out socket :.
X
Applying light pressure, turn bulb ; anti-
clockwise and remove it.
X
Insert new bulb ; and turn clockwise,
applying light pressure.
X
Insert socket : into the housing and turn
it clockwise, in the opposite direction to
that indicated by the arrow, as far as it will
go.
Front foglamps
X
Remove rubber grommet =.
X
Press locking spring ? down, forwards and
to the right.
The locking spring is released.
X
Fold locking spring ? upwards.
X
Remove bulb A.
X
Disconnect cable connector :.
X
Disconnect electrical connection ; of
bulb A.
X
Connect electrical connection ; of new
bulb A.
X
Attach it to cable connector :.
X
Insert new bulb A. When doing this, the
round recess of the socket (arrow) must be
facing upwards.
X
Fold locking spring ? downwards and
hook it in place.
X
Slide rubber grommet = upwards.
Auxiliary headlamps
X
To remove: remove screws ;.
X
Remove front headlamp unit :.
X
Turn signal lamp: gently turn bulb = anti-
clockwise and remove it.
X
Insert new bulb = and turn clockwise,
applying light pressure.
Lighting system
Z
83