Hydraulics Input Window - Mercedes-Benz Unimog Operating Instructions Manual

Menus and input windows in the on-board computer
Operation using the control lever
X
Make sure the vehicle is stationary.
X
Press black button ?.
Working functions
The
Hydraulics
The input window is selected.
X
Press black button ?.
Hydraulics
The input window appears.
X
Select the entry, change the value and con-
firm the function ( Y
"Hydraulics" input window
G
DANGER
A vehicle with positioning pump has equip-
ment with a constant flow rate connected. If
LS
you then select in the "Hydraulics" input
window, the attached equipment goes into
float setting as soon as you activate the cor-
responding working circuit. The equipment
fitted then lowers in an uncontrolled manner.
Persons in the area of danger can be seriously
or even fatally injured.
Keep the following in mind before activating
the working hydraulics: in the case of
attached equipment with a constant flow rate,
a flow rate must always be shown in the
"Hydraulics" input window, and not LS.
menu appears.
page 235).
Structural
sequence in the
on-board com-
puter
Operation and main-
tenance â
Hydraulics
Working func‐
tions
Hydraulics
Hydraulics input window, vehicles with gear pump
(example)
Symbol for working hydraulics circuit I:
:
continuous consumer on red hydraulic
connection 1, continuous consumer on
green hydraulic connection 3 or snow
plough load relief
Flow rate for continuous consumers or
;
load relief function value for snow plough
load relief
Flow rates
=
Symbols for the working hydraulics circuit
?
and power hydraulics circuit
Display
The hydraulics input
window appears.
Z
237