Tilting Back - Mercedes-Benz Unimog Operating Instructions Manual

Cab
316
X
Slide pump lever A from the vehicle tool
kit into wheel wrench ? (
X
Attach wheel wrench ? to bracket :
using pump lever A.
X
Keep moving pump lever A downwards
and upwards until the cab has reached its
end position.
The cab lock is unlocked hydraulically by
means of hydraulic pump ;.
X
Remove wheel wrench ? with pump lever
A.
X
Attach hook B of safety prop D to the top
of piston rod C.
X
Swing safety prop D downwards.
X
Secure safety prop D. In addition, place
screw E into the hole and screw a nut onto
it.
Tilting back to the driving position
G
WARNING
If the cab is not locked, the following danger-
ous situations could arise when the vehicle
decelerates:
it could tilt forwards
R
you could lose control of the vehicle
R
persons in the cab could be thrown for-
R
wards
persons or objects in the swinging range
R
could be hit
There is a risk of an accident and injury.
Before every journey, make sure that:
Y page 312).
R
R
R
X
X
X
X
X
X
the cab is locked
the cab is engaged in driving position and
the valve lever is in driving position
the indicator lamp goes out when the
engine is started
Remove safety prop D from piston rod C.
Move valve lever = on hydraulic pump ;
from position 1 to "Tilt back" to drive posi-
tion 2.
Attach wheel wrench ? to bracket :
using pump lever A.
Keep moving pump lever A downwards
and upwards until the cab has reached its
end position.
The cab tilt lock is automatically locked.
Remove wheel wrench ? with pump lever
A.
Close the front flap ( Y page 291).