Trol Lever - Mercedes-Benz Unimog Operating Instructions Manual

®
Telligent
170
lection is stored for approximately
120 seconds.
or
X
To upshift: briefly pull the cruise control
lever towards = the steering wheel.
The transmission control shifts up one
gear.
The preselected gear flashes in the on-
board computer display. The gear prese-
lection is stored for approximately
120 seconds.
Direction of travel preselection
X
Make sure that the vehicle speed is below
30 km/h.
X
Make sure that the speed limiter
( Y page 191) and cruise control
( Y page 193) are deactivated.
X
Turn the direction of travel selection switch
to the h (drive/driving forwards) position.
X Direction of travel preselection,
reverse: briefly push the cruise control
lever to the left ?.
A warning tone sounds.
or
X Direction of travel preselection,
forward: briefly push the cruise control
lever to the right ;.
A warning tone sounds.
X
Reduce speed until the vehicle is almost
stationary.
X
Depress the clutch pedal.
A signal tone and a clacking noise in the
instrument cluster sound; the preselected
gear is selected. The u indicator lamp in
the status area of the on-board computer
display lights up. The on-board computer
display shows the engaged gear.
X
Slowly release the clutch pedal and
depress the accelerator pedal.
gearshift
Operating lever
Overview
The control lever has equal status with the
multifunction lever and the cruise control
lever. The control lever can be used alter-
nately.
u button, to change direction
:
To drive forwards/to reduce speed when
;
reversing
To reverse/to reduce speed when driving
=
forwards
Direction of travel preselection
X
Make sure that the vehicle speed is below
30 km/h.
X
Make sure that the speed limiter
( Y page 191) and cruise control
( Y page 193) are deactivated.
X
Turn the direction of travel selection switch
to the h (drive/driving forwards) position.
X
Move the operating lever in direction ; or
=.
or
X
Press the u button : forwards or back-
wards.
A warning tone sounds.
X
Reduce speed until the vehicle is almost
stationary.
X
Depress the clutch pedal.
A signal tone and a clacking noise in the
instrument cluster sound; the preselected
gear is selected. The u indicator lamp in
the status area of the on-board computer