Controlling Hydraulic Connec Tions - Mercedes-Benz Unimog Operating Instructions Manual

Working hydraulics circuit I
244
X Settings
Call up the
( Y page 240).
X
Press the r or s button to select the
Back
entry.
X
Press the 9 button.
Working functions
The
closes.
Working hydraulics circuit I
Activating/deactivating working
hydraulics circuit I
Activating working hydraulics circuit I
! Only switch on the hydraulic system when
it is connected to an item of attached
equipment. There is otherwise a risk of
damage to the hydraulic system.
Vehicles with gear pump (example)
X
Connect the equipment to the working
hydraulics (see the manufacturer's sepa-
rate operating instructions) (
X
Start the engine.
X
Make sure that the hydraulic system is
switched on (
X
Press button I.
The indicator lamp in button I lights up.
Working hydraulics circuit I is activated.
menu window
menu window
Y page 230).
Y page 230).
Deactivating working hydraulics circuit
I
X
Press button I.
The indicator lamp in button I goes out.
Working hydraulics circuit I is deactivated.
or
X
Switch off the hydraulic system
( Y page 230).
or
X
Turn the key to position 1 in the ignition
lock.
Controlling hydraulic connections
Hydraulic connections, yellow, 5, 6 and
hydraulic connections, blue, 7, 8
X
Activate working hydraulics circuit I
( Y page 244).
Controlling yellow hydraulic connec-
tion 5, raising the control system
X
Press and hold white button G and move
the control lever in direction D.
Controlling yellow hydraulic connec-
tion 6, lowering the control system
X
Press and hold white button G and move
the control lever in direction B.
Controlling blue hydraulic connection 7,
moving the control system to the left
X
Press and hold white button G and move
the control lever in direction E.