Table of Contents
Advertisement
644 Breakdown assistance
Electrical fuses
Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.
* NOTE Damage due to incorrect fuses
Using incorrect fuses can result in damage to
electrical components or systems or their
functions being considerably restricted.
Use only fuses approved for Mercedes-
#
Benz with the respective specified fuse
rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the col-
our and the label. The fuse ratings and further
information to be observed can be found in the
fuse assignment diagram.
Fuse assignment diagram: on the fuse box in the
rear passenger compartment (
/
* NOTE Damage or malfunctions caused by
moisture
Moisture may cause damage to the electrical
system or cause it to malfunction.
When the fuse box is open, make sure
#
that no moisture can enter the fuse box.
When closing the fuse box, make sure
#
that the seal of the lid is positioned cor-
rectly on the fuse box.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified specialist
workshop.
Ensure the following before replacing a fuse:
The vehicle is secured against rolling away.
R
All electrical consumers are switched off.
R
The vehicle is switched off.
R
F295 0057 02
The electrical fuses are located in various fuse
boxes:
Fuse box on the driver's side of the cockpit
R
(
page 644)
/
page 645).
Fuse box in the front passenger footwell
R
(
page 645)
/
Fuse box in the rear passenger compartment
R
(
page 645)
/
Opening and closing the fuse box in the cockpit
Requirement
Observe the notes on electrical fuses
R
(
page 51).
/
Advertisement
Table of Contents
