Mercedes-Benz Unimog Operating Instructions Manual page 191

X
Using the r or s button on the mul-
tifunction steering wheel, scroll to the
Tyres
menu window.
X
Press the 9 button on the multifunction
steering wheel.
Press. selection
window.
X
To adjust the tyre pressure: use the r
or s button on the multifunction steer-
ing wheel to select the front = or rear axle
tyres ?.
X
Determine the tyre pressure to be set
( Y page 341).
X
Using the buttons on the multifunction
steering wheel, u increase or t
decrease the tyre pressure.
X
Press the 9 button on the multifunction
steering wheel.
After about ten seconds, the tyre pressures
are adjusted.
X
To cancel the procedure: switch on the
automatic tyre pressure control mode
( Y page 186).
Adjusting with the button
appears in the menu
Current tyre pressure, left front wheel
A
Current tyre pressure, right front wheel
B
Preset target tyre pressure, front axle
C
tyres
Preset target tyre pressure, rear axle tyres
D
Current tyre pressure, right rear wheel
E
Current tyre pressure, left rear wheel
F
X
Make sure that the automatic tyre pressure
control mode is deactivated (
X
Press "increase tyre pressure" button : or
"reduce tyre pressure" button ?.
Press. selection
window.
X
To adjust the tyre pressure: use the r
or s button on the multifunction steer-
ing wheel to select front C or rear axle
tyres D.
X
Determine the tyre pressure to be set
( Y page 341).
X
Press "increase tyre pressure" : or
"reduce tyre pressure" button ? repeat-
edly until the current tyre pressure is dis-
played.
X
Press the 9 button on the multifunction
steering wheel.
While the tyre pressure is being set, indi-
cator lamp ; or = remains on.
X
To cancel the procedure: switch on the
automatic tyre pressure control mode
( Y page 186).
Driving mode
Y page 186).
appears in the menu
Z
189