General Notes - Mercedes-Benz Unimog Operating Instructions Manual

Do not use the front camera, reversing cam-
era or device camera under these circum-
stances. You may injure others or cause dam-
age to objects and the vehicle while parking.
Front camera
The front camera is an optical parking and
manoeuvring aid. It shows you the area in
front of the vehicle on the monitor. It enables
a simplified view of the pocket of the front
mounting plate and provides an extended
field of vision in front of the vehicle.
Front camera
:
The monitor switches off automatically at a
speed of approximately 15 km/h. At a speed
of approximately 10 km/h, it switches back
on. Change the speed; additional information
on the monitor can be found in the manufac-
turer's operating instructions.
Reversing camera
The reversing camera is an optical parking
and manoeuvring aid and shows the area
behind the vehicle on its monitor.
You see the reversing camera image on the
monitor display : if:
the key is in position 2 in the ignition lock
R
and
you turn the direction of travel selection
R
switch to the k (reverse) position
You see the previous display on the monitor
display when the function is switched on, as
soon as you:
turn the direction of travel selection switch
R
to the i (neutral) position
drive forwards briefly
R
Additional information on the monitor is inclu-
ded in the manufacturer's operating instruc-
tions.
Device camera

General notes

The device camera is an optical aid for the
purposes of device monitoring.
In order to be able to see the device camera
image on the monitor display, you must
switch on the device camera (
Additional information on the monitor is inclu-
ded in the manufacturer's operating instruc-
tions.
Connecting the device camera
The foot of the camera is magnetic. There-
fore, the device camera can be attached to all
metallic parts freely.
Driving systems
Y page 198).
197
Z