On-Board Computer Event Window - Mercedes-Benz Unimog Operating Instructions Manual

On-board computer event window

128
Rear axle oil grade
Rear axle Oil
Under
mission oil grade used according to the Sheet
Numbers of the Mercedes-Benz Specifica-
tions for Service Products.
Setting the service products
X
Use the u or t button to scroll to ä
settings.
X
Use the r or s button to scroll to the
Service products
X
Press the 9 button.
The input window displays the assembly
and the service product characteristic, for
EngineOil
example
currently set value, e.g. 228.51.
X
To select an assembly: using the u or
t button, select an assembly with a
corresponding service product character-
istic, for example:
Engine Fuel grade
R
Engine Oil grade
R
Engine Oil viscosity
R
Transmission Oil grade
R
Rear axle Oil grade
R
X
To set the service product value: using
the r or s button, select a service
product value.
X
Set the service product value of the service
product added using the u or t but-
ton.
On-board computer event window
Notes on events
Messages include operating information,
error messages or warnings that the on-board
computer automatically displays in an event
window. In addition to the event window, an
indicator lamp may light up in the instrument
cluster or in the status area of the on-board
computer.
grade, set the trans-
menu window.
grade, as well as the
Depending on the priority of the message, the
on-board computer displays the event win-
dow in different colours:
grey event window for a malfunction/
R
notification of low priority
Observe the instructions in the event win-
dow. You can drive on.
yellow event window for a malfunction/
R
notification of medium priority
Observe the instructions in the event win-
dow. If it is possible to continue the journey
despite the malfunction, drive on carefully.
Have the affected system checked at a
qualified specialist workshop as soon as
possible.
red event window for a malfunction of
R
high priority
Observe the instructions in the event win-
dow. Stop the vehicle as soon as possible
while paying attention to the traffic condi-
tions and contact a qualified specialist
workshop. If the qualified specialist work-
shop determines it is possible to continue
driving, adapt your driving style accord-
ingly. Drive with even greater care. Keep in
mind that continuing the journey could
damage the vehicle and contravene legal
regulations. Immediately drive to a quali-
fied specialist workshop and have the
affected system checked and repaired.
If you can confirm the event window using the
9 button, the event window is hidden. You
can call up the event window again at a later
point ( Y page 125). If, in addition to the event
window, an ( Y page 144) indicator lamp has
lit up in the instrument cluster or in the status
area of the on-board computer, the indicator
lamp remains on.