Settings, Automatic Menu Win Dows - Mercedes-Benz Unimog Operating Instructions Manual

Menus and input windows in the on-board computer
242
be accelerated and decelerated using
the control lever (
Work Drive: if the hydrostatic drive sys-
R
tem has been activated, you can switch
between "drive" mode and "work" mode
( Y page 202).
X
To switch on the desired function: press
the u button.
The checkbox next to the desired function
is marked.
or
X
To switch off the desired function: press
the u button.
The checkbox next to the desired function
is no longer marked.
X
Press the 9 button.
Function button
The
closes.
"Settings", "Automatic" menu win-
dows
Structural
sequence in the
on-board com-
puter
Operation and main-
tenance â
Hydraulics
Working func‐
tions
Settings
Automatic
X
Settings
Call up the
Y
( page 240).
X
Press the r or s button to select the
Automatic
entry.
X
Press the 9 button.
Automatic
The
Y page 207)
selection window
Selection
Snow plough
menu window
selection window appears.
X
To switch the function on: press the u
button.
The checkbox next to the function is
marked.
or
X
To switch the function off: press the
u button.
The checkbox next to the function is no
longer marked.
X
Press the 9 button.
Automatic
The selection window closes.
"Settings", "Save" menu windows
If you are working with several pieces of
equipment, you can save all the settings for
two pieces of equipment in their own single
profile. You can then load the profile for that
equipment anytime ( Y
The following settings are saved in one pro-
file:
the limits of the hydraulic connections; see
R
"Settings", "Limits" (
the function assignment of the blue button
R
on the control lever; see "Settings", "Func-
tion button" ( Y page 241)
the automatic function of the snow plough;
R
see "Settings", "Automatic" (
the load relief function value for the snow
R
plough load relief; see the "Hydraulics"
input window ( Y page 237)
the flow rates for continuous consumers,
R
working hydraulics circuit and power
hydraulics circuit; see the "Hydraulics"
input window ( Y page 237)
the working speed; see Constant working
R
speed mode ( Y page 263)
in hydrostatic operation, the pulling-away
R
gear for driving modes "drive" and "work";
see Driving with the hydrostatic drive sys-
tem ( Y page 201)
the stored speed for working mode cruise
R
control ( Y page 203)
the load value; see Working limiter
R
( Y page 204)
page 239).
Y page 240)
Y page 242)