Monitoring Info - Mercedes-Benz Unimog Operating Instructions Manual

On-board computer
124
the work has been carried out professionally
will be confirmed in the on-board computer
and the Maintenance Booklet.
G
WARNING
If you do not have the prescribed service/
maintenance work or necessary repairs car-
ried out, this could result in malfunctions or
system failures. There is a risk of an accident.
Always have the prescribed service/mainte-
nance work as well as necessary repairs car-
ried out at a qualified specialist workshop.
! Only have work carried out on the engine
electronics and its associated parts, such
as control units, sensors, actuating com-
ponents and connector leads, at a qualified
specialist workshop. Vehicle components
may otherwise wear more quickly and the
vehicle's operating permit may be invalida-
ted.
! If you confirm maintenance work, without
having it performed according to schedule,
you can damage the vehicle and the assem-
blies. Wear can increase.
If you inadvertently confirm maintenance
work or confirm it too early, the mainte-
nance system calculates the new mainte-
nance due date. To prevent damage to the
vehicle or assemblies, have the corre-
sponding maintenance work performed
immediately.
Only confirm the maintenance work when
the maintenance work has been per-
formed.
X
Using the u or t button, scroll to â
operation and maintenance.
X
Use the r or s button to scroll to the
Maintenance
X To display the maintenance point and
due date: press the 9 button.
The input window shows:
menu window.
the maintenance point, e.g.
R
particle filter
the maintenance due date, e.g.
R
23.09.2014
the remaining distance, e.g.
R
If no prediction for the maintenance due
date is possible, the input window shows:
the maintenance point, e.g.
R
particle filter
the maintenance due date, e.g.
R
--.--.----
the remaining distance, e.g.
R
X To display the next maintenance point
and due date: use the r or s button
to display the maintenance due date or the
next maintenance point.
Depending on the vehicle's equipment, you
can call up the maintenance due date or
various maintenance points:
Time-based maint.
R
Diesel particle filter
R
Air filter
R
X To reset the maintenance due date:
press the r or s button to display
the desired maintenance point.
X
Press the u button.
If a reset is possible, the input window
Reset?Reset?
shows, e.g.
X
Using the r button, select the
menu bar and press the u or 9 button
to confirm.
Monitoring info menu
Reservoir pressure menu window
X
To display the reservoir pressure: using
the u or t button, scroll to the ã

monitoring info.

X
Use the r or s button to scroll to the
Reserve pressure
The menu window shows the reservoir
pressure of the \ brake circuit and
^ brake circuit as a bar display.
Diesel
2000 km
Diesel
---- km
No/Yes.
Yes
menu window.