Mercedes-Benz Unimog Operating Instructions Manual page 281

X
To enable the tipping function: press
switch :.
Indicator lamp ; in the switch lights up.
Joystick aktiv (Joystick
The Y
active)
message appears in the on-board
computer display. The å indicator lamp
in the status area of the on-board computer
lights up.
The raise/lower tipper platform control
lever function is enabled.
X
To disable the tipping function: press
switch =.
Indicator lamp ; in the switch goes out.
The raise/lower tipper platform control
lever function is disabled.
Raising/lowering the tipper platform
vehicle
X
Start the engine.
X
Enable the tipping function (
X
Ensure that in vehicles with a tipper plat-
form trailer, switch D is pressed.
X
To raise the tipper platform: press con-
trol lever ? in direction B and hold it in
place until the tipper platform has reached
the desired position.
The Y indicator lamp in the status area
of the on-board computer lights up.
X
To lower the tipper platform: make sure
that the key is in position 2 in the ignition
lock.
X
Press control lever ? in direction A and
hold it in place until the tipper platform has
reached the desired position.
When the tipper platform is fully lowered,
the Y indicator lamp in the status area
of the on-board computer goes out.
X
Disable the tipper function (
Raising/lowering the tipper platform
trailer
X
Start the engine.
X
Enable the tipping function (
Y page 278).
X
Press switch C.
The tipper platform trailer can be raised or
lowered.
X
To raise the tipper platform: press con-
trol lever ? in direction B and hold it in
Tipper platform
Y page 278).
Y page 278).
Z
279