Instrument Panel - Mercedes-Benz Unimog Operating Instructions Manual

night mode and the lights have been switched
on. If the setting cannot be changed, the input
Day
window displays
X
Use the u or t button to scroll to ä
settings.
X
Use the r or s button to scroll to the
Lighting
menu window.
X
Press the 9 button.
The input window shows the instrument
cluster lighting as a bar display.
X
Press the r or s button to select
Instrument panel.
X
Change the setting with the u or t
button.
Language menu window
The languages available depend on the coun-
try specifications of the vehicle. All text dis-
plays are shown in the set language. You can
install more languages. Further information
can be obtained from a Mercedes-Benz Ser-
vice Centre.
X
Use the u or t button to scroll to ä
settings.
X
Use the r or s button to scroll to the
Language
menu window.
X
To set the language: press 9.
The input window displays a selection of
languages.
X
Select the desired language with the r
or s button.
X
Change the setting with the u button.
Service products menu window
General notes
! If you change the data of the service prod-
ucts, the maintenance system automati-
cally adjusts the maintenance due dates
accordingly.
Set the data of the filled service products.
Otherwise, you could damage the vehicle
assemblies.
mode.
On-board computer
See the "Service products" section
( Y page 360).
Engine fuel grade
! A higher fuel sulphur content accelerates
the ageing process of the engine oil and can
damage the engine and exhaust system.
The sulphur content in the fuel is set before
the vehicle is delivered.
Observe the notes on diesel fuel and fuel
quality in the "Diesel fuel" section
( Y page 364).
Engine oil grade
! If you mix engine oils with differing oil
grades, the change interval for the engine
oil is reduced in comparison to mixtures of
engine oil of identical grade.
Therefore, only mix engine oils of differing
grade in exceptional circumstances. To
prevent damage to the engine, set the
sheet number of the engine oil with the
lower grade under
Observe the notes on engine oil in the "Engine
oils" section ( Y page 361).
Engine Oil grade, set the engine oil
Under
grade used according to the Sheet Numbers
of the Mercedes-Benz Specifications for Ser-
vice Products.
You can obtain information about service
i
products which have been tested by
Mercedes-Benz and approved for your vehi-
cle on the Internet at: http://
bevo.mercedes-benz.com/
Engine oil viscosity
Engine Oil viscosity, set the vis-
Under
cosity class (SAE classification) of the engine
oil used.
Transmission oil grade
Transmission Oil
Under
transmission oil grade used according to the
Sheet Numbers of the Mercedes-Benz Spec-
ifications for Service Products.
Engine oil grade.
grade, set the
Z
127