Side-Mounted Turn Signal Lamps - Mercedes-Benz Unimog Operating Instructions Manual

Lighting system
84
X Main-beam/dipped-beam headlamps:
remove cable connector B from bulb ?.
X
Lift left and right locking springs A and
fold them outwards.
X
Remove bulb ?.
X
Insert new bulb ? in such a way that its
base fits into the recess of the socket.
X
Lift left and right locking springs A and
fold them inwards onto the base of the
bulb.
X
Attach cable connector B to bulb ?.
X
Side lamps: remove base C with both
cable connectors and, if necessary, turn
the base slightly to do so.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
X
To fit: check that seal D is positioned cor-
rectly.
X
Attach front headlamp unit : and fasten
screws ;.
X
Adjust the auxiliary headlamp (

Side-mounted turn signal lamps

X
Remove screws :.
X
Remove turn signal lamp ;.
X
Remove seal = from the glass of the turn
signal lamp.
X
Applying light pressure, turn bulb ? anti-
clockwise and remove it.
X
Insert new bulb ? and turn clockwise,
applying light pressure.
X
Place seal = onto the glass of the turn sig-
nal lamp.
X
Attach the turn signal lamp and tighten
screws :. Make sure that seal = is posi-
tioned correctly.
Y page 78).