Strobe Light - Mercedes-Benz Unimog Operating Instructions Manual

X
Slide stand = with rotating beacon :
Y
downwards ( page 79).
X
Loosen wing nut ;.
X
Remove rotating beacon : upwards from
stand =.
X
Turn glass : of the rotating beacon anti-
clockwise in the direction of the arrow and
pull it upwards to remove.
X
Press bracket A down and turn anti-clock-
wise.
X
Pull out bulb ? from the socket.
X
Press new bulb ? into the socket until it
engages.
X
Press bracket A down and turn clockwise
as far as it will go.
X
Attach glass : of the rotating beacon and
turn it clockwise, in the direction opposite
to the arrow, as far as it goes.
X
Place rotating beacon : onto stand =.
X
Tighten wing nut ;.

Strobe light

X
Slide stand = with strobe light : down-
Y
wards ( page 79).
X
Loosen wing nut ;.
X
Pull strobe light : upwards to remove
from stand =.
X
Unscrew screw C.
X
Turn the glass of strobe light : anti-clock-
wise in the direction of the arrow and pull it
upwards to remove.
X
Unscrew screw A.
X
Pull out bulb ? from the socket.
X
Insert new bulb ? in such a way that
groove B in its base fits into the spring on
the socket.
X
Push the base of bulb ? into the socket as
far as it will go.
X
Position screw A and tighten.
X
Attach the glass of strobe light : and turn
it clockwise, in the direction opposite to the
arrow, as far as it will go.
X
Position screw C and tighten.
X
Place strobe light : onto stand =.
X
Tighten wing nut ;.
Lighting system
Z
87