Notes On Connecting/Disconnect Ing Equipment - Mercedes-Benz Unimog Operating Instructions Manual

Table of Contents

Advertisement

Front mounting plate
:
Example: tubular cross member, vehicles
:
without a front-mounted plate
Fitting additional equipment
Important safety notes
Observe the following notes:
Instructions for fitting equipment can be
R
found in the body/equipment mounting
directives in the Mercedes-Benz body man-
ufacturer portal: http://bb-
portal.mercedes-benz.com
Familiarise yourself with the applicable
R
accident prevention regulations.
Only use attached equipment for the inten-
R
ded applications as determined by the rel-
evant manufacturer.
Undergo training before using the equip-
R
ment for the first time.
Read the operating, maintenance and care
R
instructions delivered with the vehicle care-
fully. Please consult the equipment manu-
Equipment operation
facturer or a Mercedes-Benz Service
Centre if you have any questions.
Note the following before installing equip-
ment:
park the vehicle on a firm and level surface
R
switch off the engine
R
apply the parking brake
R
make sure that nobody is in the vehicle
R
make sure that nobody is between the vehi-
R
cle and the equipment
Notes on connecting/disconnecting
equipment
! Dirt entering the hydraulic system could
cause damage and malfunctions in the sys-
tem.
X
Activate the float setting (
X
Switch off the engine.
X
Only connect and disconnect equipment
when the engine is switched off. This pre-
vents unintended movements.
X
Make sure that the equipment is clean
when connecting and disconnecting.
X
Do not go between the vehicle and the
equipment.
Only use hydraulic lines designed to with-
stand the hydraulic system's maximum pres-
sure.
Transporting equipment
Important safety notes
! Observe the permissible axle and wheel
loads. Do not exceed the maximum gross
vehicle weight. During transportation, the
difference between the left and right wheel
loads should not exceed 10%.
The following parts of the vehicle may oth-
erwise be damaged:
tyres
R
chassis
R
axles
R
269
Y
page 246).
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents