Where Will I Find; Window Cleaner/Scraper - Mercedes-Benz Unimog Operating Instructions Manual

Window cleaner/scraper with tele-
scopic pole
X
Open stowage compartment =
( Y page 312) and remove the window
cleaner/scraper.
X
Press telescopic pole : downwards
(arrow) and pull it out to the rear.
X
Screw the window cleaner/scraper onto
telescopic pole :.
X
Loosen the screw connection of telescopic
pole :.
X
Extend and tighten the moving part of tele-
scopic pole :.
X
Clean the window, follow instructions
( Y page 286).
X
Loosen the screw connection of telescopic
pole :.
X
Retract and tighten the moving part of tele-
scopic pole :.
X
Unscrew the window cleaner/scraper from
telescopic pole : and place it in stowage
compartment =.
X
Slide telescopic pole : into the front of
guide ; and press upwards at the back
until it engages in retaining clamp ?.

Where will I find...?

Assembling/disassembling the pump
lever (2-part)
G
WARNING
If you do not assemble the pump lever as
described, the handle can slip out of the guide
while pumping. There is a risk of injury.
Make sure that the locking pin of the pump
lever is engaged in the hole intended for the
purpose.
Use the pump lever to operate:
the jack
R
the wheel wrench
R
the cab tilt pump
R
Recess (jack)
:
Jacking point (wheel wrench/cab tilt
;
pump)
Locking pin
=
Recess (for operating the winch and jack)
?
Hole for the locking pin
A
Retaining sleeve
B
X
Remove the pump lever from the tool bag
located in the stowage space in the rear left
of the cab ( Y page 312).
X
To assemble the pump lever: insert pump
lever locking pin = into recess ?.
X
Turn the pump lever.
Locking pin = engages in hole A.
X
To disassemble the pump lever: press
locking pin = and pull apart the pump
lever.
313
Z