Hydraulic Jack - Mercedes-Benz Sprinter Operating Instructions Manual

240 Breakdown assistance
Unlocking and removing the storage compartment
cover
Remove the rubber mat from the co-driver's
#
footwell.
To unlock: turn quick-release fastener
#
counter-clockwise to position 1.
Slightly raise and pull out the cover.
#
Inserting and locking the cover
Slide in the cover and press it downwards.
#
Press down quick-release fastener
#
engages.
To lock: turn quick-release fastener
#
wise to position 2.
Removing the vehicle tool kit
Example: vehicle tool kit insert
Raise the insert at marked points 1.
#
Pull the insert out of clips 2.
#
Storing the vehicle tool kit
Slide the insert into clips 2.
#
Close the insert by pressing on marked points
#
1.

Hydraulic jack

Information on the hydraulic jack
1
The hydraulic jack is located in side compartment
1 above the co-driver door step.
1 until it
Vehicles with more than 18 seats
1 clock-
Hydraulic jack
seat on the right.
The jack has a maximum weight of 16.5 lbs
(7.5 kg) depending on the vehicle's equipment.
You will find the maximum load capacity of the jack
stated on the adhesive label attached to the jack.
If there is a malfunction, please contact a qualified
specialist workshop.
1 is located behind the last bench