Table of Contents
Advertisement
202 Breakdown assistance
Remove the rubber mat from the front-
#
passenger footwell.
To unlock: turn the quick-release fastener
#
counter-clockwise to position 1.
Slightly raise and pull out the cover.
#
Inserting and locking the cover
Slide in the cover and press it downwards.
#
Press down the quick-release fastener
#
until it engages.
To lock: turn the quick-release fastener
#
clockwise to position 2.
Removing the vehicle tool kit
Remove the vehicle tool kit from stowage
#
compartment 1.
Hydraulic jack
Information on the hydraulic jack
The hydraulic jack is located in side compartment
1
above the co-driver door step.
1
The jack has a maximum weight of 16.5 lbs
(7.5 kg) depending on the vehicle's equipment.
You will find the maximum load capacity of the
jack stated on the adhesive label attached to the
jack. If there is a malfunction, please contact a
qualified specialist workshop.
Jack maintenance:
1
Clean and grease all moving parts after use.
R
1
Extend and retract the pistons fully every six
R
months.
Removing the pump lever rod and the jack
Requirements:
The co-driver's door is open.
R
To open: press down and unclip fasteners
#
on the cover.
Remove the cover.
#
Pull out the holder completely and place it on
#
the step.
1
Hide quick links:
Advertisement
Table of Contents
