Table of Contents
Advertisement
188 Breakdown assistance
Inserting and locking the cover
Slide in the cover and press it downwards.
#
Press down quick-release fastener
#
engages.
To lock: turn quick-release fastener
#
wise to position 2.
Removing the vehicle tool kit
Example: vehicle tool kit insert
Lift the insert at marked positions 1.
#
Pull the insert out of clips 2.
#
Storing the vehicle tool kit
Slide the insert into clips 2.
#
Close the insert by pressing on marked posi-
#
tions 1.
Hydraulic jack
Information on the hydraulic jack
The hydraulic jack is located in side compartment
1
above the co-driver door step.
The jack has a maximum weight of 16.5 lbs
1
until it
(7.5 kg) depending on the vehicle's equipment.
You will find the maximum load capacity of the jack
1
clock-
stated on the adhesive label attached to the jack.
If there is a malfunction, please contact a qualified
specialist workshop.
Jack maintenance:
Clean and grease all moving parts after use.
R
Extend and retract the pistons fully every six
R
months.
Removing the pump lever rod and the jack
Requirements:
The co-driver door is open.
R
To open: press down and unclip fasteners
#
on the cover.
Remove the cover.
#
Pull out the holder completely and place it on
#
the step.
1
Advertisement
Table of Contents
