Basic Ap-7161 Configuration; Specifications - Motorola AP-7161 Installation Manual

30
The AP-7161 can also be connected directly to a Motorola Solutions controller if it is located within 100 meters of the controller
and a PoE port is available. If the CAT5E cable used to connect the radio and the controller has to travel though a building
egress, a suitable lightning protection system must be deployed (see
When using controllers, the total power limits for the AP-7161 must be considered. The two radio configuration draws less power
than a three radio configuration. If insufficient power is available, the software will disable the third radio and throttle back
performance on all radio and Ethernet interfaces.

Basic AP-7161 Configuration

The AP-7161 access point receives its configuration once adopted by a Motorola Solutions RFS4000, RFS6000 or RFS7000
series controller. There are no required initial configuration settings beyond verifying power and LED functionality for the access
point. Once adopted, the access point is managed by its connected controller and can receive periodic firmware updates when
Motorola Solutions releases updates with new controller functionality.
For information on how use a Motorola Solutions RFS Series controller to manage an AP-7161 access point, refer to
http://support.symbol.com/support/product/manuals.do.

Specifications

Hardware Specifications
Operating Voltage
Operating Current
Power In (PoE)
Unit Dimensions (mounted)
Unit Weight
Mounting
LED
Uplink
Antenna Connectors
Console Port
Hardware Reset
Multi Band Security Sensor
36-57 VDC
Not to exceed 750 mA@48 VDC
PoE support inbound power - 802.3AT on GE1/POE port
32cm W x 22.5cm H x 10cm D
6.4 lbs / 2.9 Kg
Adaptable mounting kit for pole and wall deployments with optional extension arm accessory
6 top mounted weatherized LEDs with multi function read
2 Gigabit Ethernet Ports (GE1/POE, GE2) autosensing
Outdoor rated N-Type connectors
Outdoor rated RJ45 console port
External hardware reset button
Outdoor 27x7 Wireless Intrusion Prevention System (IPS) Sensor
(Part number AP-7161-66S40-INTL, AP-7161-66S40-US)
AP-7161 Access Point Installation Guide
Ethernet and Lightning Protection on page 11).