FRONT SUSPENSION
Checking spring setting
Make sure the spring setting of the front suspension is
correct.
The standard setting for this motorcycle is as indicated
in the table below.
Standard setting
Check that right and left spring settings are in
the same position.
A: Adjuster
REAR SUSPENSION
Checking spring setting
Make sure the spring setting of the rear suspension is
correct.
The standard setting of this motorcycle is as indicated
in the table below.
Standard setting
A: Adjuster
Rebound Damping Force Adjustment
Adjust the setting of the rebound damping force to the
standard position.
To adjust, turn the adjuster
and then turn it counterclockwise until approximately
1-1/4 turns are felt and the two punch marks align.
Do not force the adjuster screw
stopped position or you may damage the
adjuster.
24
Position 3
Position 4
B clockwise until it stops
B past the