Volume - Multiplex Profi TX Operating Instructions Manual

The menus
4.3.1
PROFI TX
Opening the menu
To open the main menu: Button

Volume

The general volume and the volume of the variometer tone are configured
separately.
The figure below illustrates the default configuration of a newly created model
memory. The following options are available:

Assign.Contr.: You can use any freely assignable control as volume
actuator. This also includes virtual switches (MagicSwitch and flight
phases). The assigned control is used when the fixed value is set to OFF.

Fixed value: The setting range is OFF to 25.
The default setting is 16. When OFF is selected, volume control is
transferred to the assigned control. If no control is assigned the device
remains muted.
Special features:

General volume: When the volume is switched on using a control, the
announcement sequence of the sensor data is restarted.

Variometer tone: When the volume is switched on using a control, the
altitude is announced once.

PROFI TX 16 only: Servo 16 can be used as volume actuator. Complex
volume control scenarios can be implemented using mixers, e.g. the
variometer tone can be muted when pushing/pulling and opening the
throttle.
Page 95