Setting The Transition Time - Multiplex Profi TX Operating Instructions Manual

7.2.10.6
Page 208
2 START1
3 START2
4 THERMAL1
5 THERMAL2
After activating the input field for the name, select a name by pressing the
+ / – buttons or by using the central wheel.
Two exceptions apply to the AUTOROT name: There is no transition delay
when switching to this flight phase and the lower throttle limit is overridden.

Setting the transition time

When switching between flight phases, you can choose to apply a delay
time of 0.1 to 6.0 seconds for a smooth transition.
1. Open the Setup main menu.
2. Open the Flight phases menu.
3. Select the Slow menu item.
4. Switch to the desired flight phase.
5. Press the + / – buttons or use the central wheel to set the transition time.
6. Confirm your settings.
Creating and customising models
7 SPEED2
8 CRUISE
9 LANDING
10 AUTOROT
12 3D
13 ACRO
PROFI TX