Controlfunctions Main Menu - Multiplex Profi TX Operating Instructions Manual

4.4
Page 118

ControlFunctions main menu

You can use this menu to adjust the settings for control functions, e.g. trims,
travels, control curves, etc.
The menu is dynamic:

It lists only the control functions that are actually used, i.e. the control
function must control at least one servo directly using mixers.

The menu content differs for vehicle models, fixed-wing models, and
helicopter models.

Control functions that do not have configurable parameters are not shown
(Wheel Brake, Mixture, Towing dog).
Refer to section "Control functions of the model templates" on page 172 for a list of
the control functions offered by the PROFI TX model templates.
Overview of controls functions - fixed-wing models
Aileron
Elevator Trim Step size, Expo
Rudder
Throttle Trim: Step size & Mode, Expo, Run-up Time
Flap
Spoiler
Retract.Gear
Aux-1 Slow, Fixed value
Aux-2
Aux-3
Aux-4
Gyro Type of Gyro, Fixval. Sense
FP
= with flight phase switching
FP FP
, D/R, Travel
FP
FP
, Suppression, controlled Axis
The menus
PROFI TX