User Data; Pin; Language - Multiplex Profi TX Operating Instructions Manual

4.3.10
4.3.10.1
4.3.10.2
Page 116

User data

Personal data, the PIN for disabling data entry, the menu language and free text
(max. 32 characters) can be configured in this menu to customise the transmitter
according to your needs.

PIN

Any PIN entry that differs from the pre-set value 0000 activates the code lock.
Entering 0000 deactivates the lock.
When the code lock is active the user is prompted for the PIN before an input
field is opened. The PIN is entered via the buttons on the keypad. The PIN
must be known in order to be able to change any settings.
If you have forgotten the PIN the code lock cannot be deactivated: Please
contact one of our Service Centres.
After PIN entry, the code lock is activated when the device is switched on again.

With active code lock, the user is prompted for the PIN when opening an input
field.

Upon entry of the correct PIN, all input fields remain enabled until the device
is switched off again.

If the wrong PIN is entered the input fields remain disabled. The PIN prompt
is displayed every time you try to open an input field.

Language

Used for changing menu language and speech output.
The PROFI TX uses language pairs: always English and an alternative
language (German, French).
o
You can use the update function to change the language pair (see
section 6.3 "Software update" on page 178).
o
Any user-editable text (names of models, control functions, mixers,
timers) remain unchanged in the language they were created.
o
New model memories are created in the new language.
The menus
PROFI TX