Set Alarm Clock - Multiplex Profi TX Operating Instructions Manual

The menus
4.7.3
PROFI TX
Here, you select if the counter reading is stored when the memory is changed or
the device is switched off.

Select ON to store the counter reading.

Select OFF if you wish the timer to restart.
Announce
Here, you select if time markers are announced.
Time markers are defined at 5, 3, 2, 1 minute(s) and 30, 20, 15, 10,
5, 0 seconds.
Edit name
Specify a name for the timer. Refer to section 5.1.3 "Text input" on page 166
for details.

Set Alarm Clock

The clock in the PROFI TX (see section 4.7.4 "Date & Time" on page 156) has an
alarm clock function.
When the set alarm clock time is reached, the alarm clock rings in brief intervals
for 10 minutes and the time is announced. During this time, a clock icon, the date,
time, and battery charge level are displayed on the screen.
To stop the alarm press the wheel.
In line 1, the current date and time are displayed on the right.
OFF
Here, you activate the alarm clock. You must reactivate the alarm clock for
each alarming procedure.
Hour
Hours of the alarm clock time in 24-hour format.
Minute:
Minutes of the alarm clock time.
Weekday
Day of the week on which the alarm clock should ring.
OFF: The weekday is ignored.
Page 155