Editing Model Memories - Multiplex Profi TX Operating Instructions Manual

Operating the transmitter using the PC
6.2
PROFI TX
Die PROFI TX switches on automatically when it is supplied with charging voltage.
The USB icon is shown on the right side of the screen and the state of charge and
the charging current are displayed on the left.
The PROFI TX logs into the PC as mass storage (drive) with the name
"PROFI TX".
Open this "drive". It contains the following folders:

DATA; contains the model memories, see section 6.2 "Editing "

AUDIO; contains the speech output files

UPDATE; see section 6.3 "Software update"

Editing model memories

The "DATA" folder on the PC contains the entire model memory of your
PROFI TX. Files with the extension "MDL" contain one model data set each.
You can delete or archive the model data sets on the PC or edit the numbers to
reorganise the memory.
Do not change the file name format. The PROFI TX only recognises file names in
this format: PTXxxx.MDL (where "xxx" represents the memory number with
leading zeros)
Page 177